Grundfos DWK.E.10.150.220.5.1D (96922668)
ID prodotto: 96922668
Richiesta del prezzo e disponibilità
Grundfos DWK.E.10.150.220.5.1D (96922668)
Submersible Contractor Pump
Grundfos DWK pump is a submersible pump for dewatering and drainage applications.
The pump is suitable for pumping
|
The pump design makes it suitable for both temporary and permanent installation.
The pump is cast iron, with vertical discharge port and integrated submersible 3-phase enclosed motor in insulation class F (155°C).
The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and an enclosed impeller to ensure high efficiency.
The pump is equipped with a double mechanical seal and an additional lip seal that protects the shaft and the mechanical seal against abrasives.
The pump is fitted with suction strainer and 10 m cable.
The pump is equipped with a temperature Bi-metal sensor for motor protection in case of overheating and electrode seal sensor to detect water penetration in to the motor housing.
The cable sealing consists of a rubber bushing, epoxy and rubber cover that eliminates the risk of water penetration into the motor.
| Specification | Value | |
|---|---|---|
| Controlli: | ||
| Sensore tenuta: | Y | |
| Liquido: | ||
| Gamma temperatura del liquido: | 0 .. 40 °C | |
| Densità: | 998.2 kg/m³ | |
| Tecnico: | ||
| Diametro effettivo della girante: | 250 mm | |
| Tipo di girante: | E | |
| Dimensione max delle particelle: | 10 mm | |
| Tenuta meccanica primaria: | SIC-SIC | |
| Tenuta meccanica secondaria: | CERAMIC-CARBON | |
| Max. rendimento idraulico: | 58 % | |
| Tolleranza della curva: | ISO9906:2012 3B | |
| Materiali: | ||
| Corpo pompa: | Ghisa | |
| EN1561 EN-GJL-200 | ||
| Girante: | Ghisa duttile | |
| EN1563 EN-GJS-450-10 | ||
| Motore: | Ghisa | |
| EN1561 EN-GJL-200 | ||
| Installazione: | ||
| Max temperatura ambiente: | 40 °C | |
| Mandata pompa: | DN 150 | |
| Profondita max. di installazione: | 25 m | |
| Dati elettrici: | ||
| Potenza - P2: | 22 kW | |
| Frequenza di rete: | 50 Hz | |
| Voltaggio: | 3 x 380-415 V | |
| Toller. voltaggio: | +5/-5 % | |
| Max. numero avviamenti per ora: | 18 | |
| Corrente: | 43 A | |
| Corrente nominale a 3/4 di carico: | 34 A | |
| Corrente nominale a metà carico: | 25 A | |
| Cos phi - fattore di potenza: | 0.855 | |
| Cos fi - fattore di potenza a 3/4 di carico: | 0.824 | |
| Cos fi - fattore di potenza a 1/2 carico: | 0.747 | |
| Velocità nominale: | 2850 rpm | |
| Rendimento motore a pieno carico: | 89.2 % | |
| Rendimento motore a 3/4 di carico: | 88.6 % | |
| Efficienza motore a 1/2 carico: | 86.7 % | |
| Nr di poli: | 2 | |
| Tipo di avviamento: | Stella/Triangolo | |
| Classe di protezione (IEC 34-5): | IP68 | |
| Classe di isolamento (IEC 85 ): | F | |
| Antideflagrante: | no | |
| Lunghezza del cavo: | 10 m | |
| Tipo di cavo: | TP90/TP90 | |
| Altri: | ||
| Peso netto: | 427 kg | |