Lenntech Trattamento e Purificazione dell'Acqua Lenntech Trattamento e Purificazione dell'Acqua

Coagulants and Flocculants

Coagulation-Flocculation The stages in agglomeration Coagulants and flocculants Reagents

The coagulants

Trivalent cations : the neutralization of the negative surface of the colloid is accomplished by the addition of cations in the case of inorganic coagulants. The trivalent ions are ten times more effective than the divalent ion. Trivalent iron and aluminum salts keep on the be be widely used in all the water coagulation treatments.

The influence of the pH : Inorganic coagulant because of their hydrolysis change the physical-chemical characteristics of water to be treated (pH, conductivity, …) :

M 3+ + 3 H2O <=> M(OH)3 + 3 H+

The pH necessary for coagulation may be adjusted by addition of an acid or a base.


Optimum pH for Coagulation-Flocculation


6.0 – 7.4


> 5

Sludge production : The formation of metallic hydroxide causes the production of a substantial amount of sludge. This sludge should be removed in the final solids-liquids separation process.

Organic coagulants may also be used. The advantage of those cationic polyelectrolytes is because they directly neutralize the negative colloids. Consequently to this direct action the amount of sludge is considerably reduced.

The flocculant

Inorganic polymers (activated silicia) and natural polymers (starches, alginate) were the first to be used. But the use of synthetic flocculants often results in a minimum amount of sludge. Combined with modern separation techniques can allow to produce very dense sludge that can be directly treated in a dewatering unit.

Resource: Water treatment Handbook Degrémont

A proposito di Lenntech

Lenntech BV
Distributieweg 3
2645 EG Delfgauw

tel: +31 152 755 706
fax: +31 152 616 289
e-mail: info@lenntech.com

Copyright © 1998-2017 Lenntech B.V. All rights reserved